Is there camshaft oil spray bar modification for the Tipo 16v head ?

Road-race engines and ancillaries - general discussion
Post Reply
Kerem1967
Posts: 19
Joined: December 26th, 2012, 9:08 pm
Contact:

Is there camshaft oil spray bar modification for the Tipo 16v head ?

Post by Kerem1967 » May 4th, 2021, 5:26 pm

Dear Friends,

I have heard that there is a modification for the oil spray bar for the 16v cylinder head’s camshafts in order to prevent lobe failure such as drilling 0.5mm holes on the spray bar for each lobe. Is this true ?

In my opinion that many x 0.5mm holes would drop the oil pressure.

I would very much appreciate your comments.

Regards
GC_90

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests