last bit!
The whole engine is held together by friction. No keyways, splines on crank or cams. I was so worried it would blow to bits. I was uber-careful about the torque regime for everything...
I don't like things like this but yes, they had obviously done the maths..
GC
Ford Duratec 1600 race unit - Phase 4
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Ford Duratec 1600 race unit - Phase 4
- Attachments
-
- TN Duratec_ last ops (1).JPG (121.49 KiB) Viewed 24366 times
-
- TN Duratec_ last ops (2).JPG (110.21 KiB) Viewed 24366 times
-
- TN Duratec_ last ops (3).JPG (114.61 KiB) Viewed 24366 times
-
- TN Duratec_ last ops (4).JPG (112.31 KiB) Viewed 24366 times
-
- TN Duratec_ last ops (5).JPG (119.37 KiB) Viewed 24366 times
-
- TN Duratec_ last ops (6).JPG (122 KiB) Viewed 24366 times
-
- TN Duratec_ last ops (7).JPG (129.93 KiB) Viewed 24366 times
-
- TN Duratec_ last ops (8).JPG (634.81 KiB) Viewed 24366 times
-
- TN Duratec_ last ops (9).JPG (608.96 KiB) Viewed 24366 times
-
- TN Duratec_ last ops (10).JPG (561.72 KiB) Viewed 24366 times
-
- TN Duratec_ last ops (11).JPG (639.06 KiB) Viewed 24366 times
-
- TN Duratec_ last ops.JPG (126.96 KiB) Viewed 24366 times
-
- TN Duratec_final assy ops (1).JPG (130.16 KiB) Viewed 24366 times
-
- TN Duratec_final assy ops (2).JPG (123.03 KiB) Viewed 24366 times
-
- TN Duratec_final assy ops (3).JPG (99.49 KiB) Viewed 24366 times
-
- TN Duratec_final assy ops (4).JPG (113.99 KiB) Viewed 24366 times
-
- TN Duratec_final assy ops (5).JPG (119.94 KiB) Viewed 24366 times
-
- TN Duratec_final assy ops (6).JPG (122.11 KiB) Viewed 24366 times
-
- TN Duratec_final assy ops (7).JPG (129.21 KiB) Viewed 24366 times
-
- TN Duratec_final assy ops (8).JPG (124.12 KiB) Viewed 24366 times
-
- TN Duratec_final assy ops.JPG (127.73 KiB) Viewed 24366 times
Who is online
Users browsing this forum: No registered users and 6 guests