Looking for Sample screens for my 2,0 16V
Posted: May 22nd, 2012, 5:45 pm
Hi Trying to map My DTA , And i end up with wery high ignition degrees without knocking ,as far as i can hear! using a AFR meter and skilled experience to map in uphill.
Wonder anybody have some sample screens from mapping 2,0 16 V ECU. at least so i can compare a bit. Runs great now, but still worrid about high degrees off ignition . Full thottle on 6000rpm 32 degrees in advance. More on half throttle at 4000rpm.
Have throttle bodies and Two 280 degrees cams ,and 12/1 in compression,
Reg Ove Thorkildsen othorkild@c2i.net
Wonder anybody have some sample screens from mapping 2,0 16 V ECU. at least so i can compare a bit. Runs great now, but still worrid about high degrees off ignition . Full thottle on 6000rpm 32 degrees in advance. More on half throttle at 4000rpm.
Have throttle bodies and Two 280 degrees cams ,and 12/1 in compression,
Reg Ove Thorkildsen othorkild@c2i.net