One of two, this is engine _01 for site member Mick Wood.
http://www.youtube.com/user/GC1438?ob=0 ... sults_main
GC
Gp4 16v 124 CSA 1800 on first test at GCRE
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Gp4 16v 124 CSA 1800 on first test at GCRE
- Attachments
-
- part rigged.JPG (640.6 KiB) Viewed 6353 times
-
- Posts: 89
- Joined: May 31st, 2011, 2:40 pm
- Contact:
Re: Gp4 16v 124 CSA 1800 on first test at GCRE
Hello Guy
Engine looks and sounds great. What sort of power and torque do you expect? Will it be running on 45's in Micks Spider or will he use the 48 idfs? Ignoring the problems of fitting which would give the best results?
Engine looks and sounds great. What sort of power and torque do you expect? Will it be running on 45's in Micks Spider or will he use the 48 idfs? Ignoring the problems of fitting which would give the best results?
GC_13
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Gp4 16v 124 CSA 1800 on first test at GCRE
Power and torque absolutely no idea! Sorry. These are outside my dyno exp, big bore 1800s.
One is 45s and will stay on them, my idea - this one was virtually scratch-built by me. The other is starting on 48IDF and later going mech FI.
Some footage of _02 just uploaded to:
http://www.facebook.com/profile.php?id= ... 3370767855
GC
One is 45s and will stay on them, my idea - this one was virtually scratch-built by me. The other is starting on 48IDF and later going mech FI.
Some footage of _02 just uploaded to:
http://www.facebook.com/profile.php?id= ... 3370767855
GC
-
- Posts: 3
- Joined: March 12th, 2011, 10:39 pm
- Location: California
Re: Gp4 16v 124 CSA 1800 on first test at GCRE
Thats the stuff we fantasize about ...often
What is your choice of finish on the sump pan? Is it steel?
What is your choice of finish on the sump pan? Is it steel?
GCRE edifies. Trevor
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Gp4 16v 124 CSA 1800 on first test at GCRE
Yes, that's a GC big-wing item in steel and it's simply sprayed with aerosol Simoniz acrylic satin black. I don't believe plating on in-house fabricated things like that, just makes weld repairs more difficult.
G
G
Who is online
Users browsing this forum: No registered users and 1 guest