Page 1 of 1
Cam identification.
Posted: June 1st, 2009, 4:58 pm
by Franco Rosso
Dear Guy,
Could you help to identify if its possible a set of cams which have stamped on them 6F Fiat (C) 4182 . They come from a late Group 'N' car and are claimed to be Alquati Steel Billet.
Many Thanks
Franco Rosso
Re: Cam identification.
Posted: June 1st, 2009, 5:35 pm
by Guy Croft
GpN had to run standard cams,
G
Re: Cam identification.
Posted: June 2nd, 2009, 7:07 pm
by Franco Rosso
Dear Guy,
You are of course right group N cars ran standard cams. These i have subsequently found out ran on a 131 not a !30. What I needed to know was how I can identify Alquati steel billet cams from standard cams.
Thanks
Franco Rosso
Re: Cam identification.
Posted: June 4th, 2009, 8:00 am
by Guy Croft
Lets have some photos esp of the region where the codes are.
I'd know an Alquati cam by sight - if the photo quality is good enough.
G
Re: Cam identification.
Posted: June 4th, 2009, 2:09 pm
by Franco Rosso
These are the cams, the number is a bit obscured but reads 4636582
I hope these are the right sort of pictures for you to identify the cams, sorry for the massive scale, but the detail and writing is pretty clear!
Thanks alot
Franco
Re: Cam identification.
Posted: June 4th, 2009, 3:50 pm
by Guy Croft
Just production standard Fiat
GC