Page 1 of 1
Shimming tools 8V, 16V Fiat TC & Fiat SOHC
Posted: November 25th, 2007, 6:13 pm
by Walezy
Hello,
Is the shimming tool for 8v head suitable for 16v head? Is this the same tool or there is a special one for those heads.
Thanks
Tomasz
Posted: November 28th, 2007, 8:44 am
by Guy Croft
No it's not quite the same as the 8V.
The 16v shimming tool part numbers are:
Pressure lever (also used on 8V unless you simply rotate cams to insert the 8V positioning tool) 1860443000
Positioning tool 1860747000
I stock the 8V shim tools - notoriously hard_to_get.
GC
Posted: November 28th, 2007, 9:42 am
by Walezy
Thank you for the info. Do you know where i can get the shipping tool for 16v?
Posted: November 28th, 2007, 9:48 am
by Guy Croft
It's an order from an apppointed Fiat dealer unless you want me to get one, subject to availablity from Fiat, I often do, contact me by email if you do please.
GC