Hello Guy,
Do you know the flow rate of an oil pump of the TC engine (Montecarlo pump) ?
Thank you,
Robert
Oil pump flow rate
-
Robert
- Posts: 86
- Joined: August 20th, 2006, 8:17 am
- Location: France
- Contact:
Oil pump flow rate
GC_131
-
Guy Croft
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Oil pump flow rate
Sorry, I have no data OE or otherwise.
G
G
-
cos
- Posts: 39
- Joined: July 6th, 2006, 11:26 am
- Location: Essex
- Contact:
Re: Oil pump flow rate
the 130 abarth rotors according to Pace who had a look at them flow 28l/min per 1000 pump rpm. The gears measured 34mm od 40mm wide.
-
Guy Croft
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Oil pump flow rate
Thanks Cos, same gears as the MonteCarlo.
If anyone fancies having a go at working it out here are the fundamentals. Comparison with Pace assessment welcome.
http://www.zenithpumps.com/applications/vol.htm
GC
If anyone fancies having a go at working it out here are the fundamentals. Comparison with Pace assessment welcome.
http://www.zenithpumps.com/applications/vol.htm
GC
-
Robert
- Posts: 86
- Joined: August 20th, 2006, 8:17 am
- Location: France
- Contact:
Re: Oil pump flow rate
Hello,
Thank you for the value. Do you know the ratio between the pump rev and the engine rev ? Because I don't think it is 28l/mn per 1000 rpm of the engine (182 l /mn @ 6500rpm !).
Robert
Thank you for the value. Do you know the ratio between the pump rev and the engine rev ? Because I don't think it is 28l/mn per 1000 rpm of the engine (182 l /mn @ 6500rpm !).
Robert
GC_131
-
Guy Croft
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Oil pump flow rate
The pump goes at half crank speed.
I just counted the teeth on the driven gear and aux driveshaft (14 both)
GC
I just counted the teeth on the driven gear and aux driveshaft (14 both)
GC
Who is online
Users browsing this forum: No registered users and 22 guests