Post pics of your car in here
ICI
Posts: 55 Joined: August 30th, 2006, 9:02 pm
Location: Rousse, Bulgaria
Contact:
Post
by ICI » October 8th, 2012, 11:29 pm
Urbancamo wrote: Hello.
Some serious power you get there, definately.
Keep up the good work.
T
Thanks :)
I did a little testing this night, big wheel spinning at 1st and too early 2nd shifting
http://www.youtube.com/watch?v=UvsHtj-w8HE
boost 1.4 bar, the times approx like that:
1/4 mile 11.5 sec @ 191 km/h
0-100 km/h 3.8 sec
0-200 km/h 13.5 sec
100-200 km/h 9.7 sec
powered by ICIDesign
tricky
Posts: 101 Joined: July 6th, 2010, 5:41 pm
Post
by tricky » October 9th, 2012, 8:14 am
That engine sounds truly sweet on track !
Twice as many valves
ICI
Posts: 55 Joined: August 30th, 2006, 9:02 pm
Location: Rousse, Bulgaria
Contact:
Post
by ICI » October 9th, 2012, 11:18 am
tricky wrote: That engine sounds truly sweet on track !
yes, I love it :)
The track onboard at the previous page is filmed with GoPro cam and the sound is very clear and true.
Meanwhile, I soursed turbine housing 0.73 A/R, soon the improvement will take a place.
powered by ICIDesign
ICI
Posts: 55 Joined: August 30th, 2006, 9:02 pm
Location: Rousse, Bulgaria
Contact:
Post
by ICI » October 24th, 2012, 9:25 pm
The new A/R .73 turbine housing is here, compared next to the old one A/R 1.06.
The difference is pretty big, may be near 1000 rpm earlier spool will be :)
Attachments
Picture 631.jpg (162 KiB) Viewed 7463 times
Picture 647.jpg (268.53 KiB) Viewed 7463 times
powered by ICIDesign
ICI
Posts: 55 Joined: August 30th, 2006, 9:02 pm
Location: Rousse, Bulgaria
Contact:
Post
by ICI » October 25th, 2012, 10:48 pm
almost done, have to finish the 76mm full lenght stainless steel exhaust soon
Attachments
IMGP6562.jpg (237.59 KiB) Viewed 7432 times
IMGP6572.jpg (255.21 KiB) Viewed 7432 times
IMGP6575.jpg (157.26 KiB) Viewed 7432 times
powered by ICIDesign
ICI
Posts: 55 Joined: August 30th, 2006, 9:02 pm
Location: Rousse, Bulgaria
Contact:
Post
by ICI » October 29th, 2012, 9:06 pm
finaly, did it for my car also
Attachments
IMGP6590.jpg (152.57 KiB) Viewed 7249 times
IMGP6595.jpg (176.12 KiB) Viewed 7249 times
powered by ICIDesign
ICI
Posts: 55 Joined: August 30th, 2006, 9:02 pm
Location: Rousse, Bulgaria
Contact:
Post
by ICI » November 4th, 2012, 10:28 pm
Unfortunately this evening the gearbox gave up.
I had boost creep issues with the Turbosmart 38mm wastegate together with the new 0.73 A/R turbine housing.
The boost was uncontrollable above 5000 rpm and I lost it few times up to 1.8 bar.
And a strong rattle and scratching noise appeared, obviously from 2 nd gear, the 1 st gear started whining too...
A lot of work has to be done.
powered by ICIDesign
Users browsing this forum: No registered users and 11 guests