Hex plug in Fiat TC cylinder head
-
- Posts: 12
- Joined: June 21st, 2009, 6:03 am
Hex plug in Fiat TC cylinder head
I would like to know the threading of the hex plug in a Fiat 8v TC cylinder head. I want to remove the plug and install a temperature sensor for my Megajolt system. Also I am having some difficulties removing the plug. It's probably been in there since 1977 and the walls of the plug are damaged. Are there any issues with applying some heat in this area?
dlh98370
dlh98370
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Hex plug in Fiat TC cylinder head
You may find it is only possible to remove it by drilling out and rethreading, that is my exp anyway. There is no problem wiht heating it up - I would use oxy-acetylene - in a very localised way. Brief application of very intense heat just around the plug (bringing the alloy almost to melting point) would be the only way heat would help. You would have to have the socket in place ready to apply force to the plug and the head clamped to stop it rotating..
G
G
-
- Posts: 54
- Joined: October 23rd, 2007, 8:42 pm
- Location: Barnsley, South Yorks. UK (A)
- Contact:
Re: Hex plug in Fiat TC cylinder head
If it's the same as the water outlet in the top of the head then strangely it's a BSP (British Std pipe??) IIRC. The water outlet on a head I was doing was damaged so I had to get it out, very carefully. It's now been replaced with some plumbing fittings from B&Q, worked a treat with a bit of thread tape and been leak free ever since.
-
- Posts: 50
- Joined: July 9th, 2011, 2:30 pm
- Contact:
Re: Hex plug in Fiat TC cylinder head
Hi,
I had the same problem on my head. I was able to remove the plug by drilling, without damage the thread. I drilled larger and larger until loosening of the plug. The plug thread is M16x1.5, slightly conical plug.
Hope this can help
Regards
Daniel
I had the same problem on my head. I was able to remove the plug by drilling, without damage the thread. I drilled larger and larger until loosening of the plug. The plug thread is M16x1.5, slightly conical plug.
Hope this can help
Regards
Daniel
- Attachments
-
- IMG_0415.jpg (166.64 KiB) Viewed 47509 times
-
- plug removed
- IMG_0417.jpg (160.43 KiB) Viewed 47509 times
GC_17
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Hex plug in Fiat TC cylinder head
...they are 3/8" BSP taper (BSPT).
I am 99.9% certain of that.
GC
I am 99.9% certain of that.
GC
-
- Posts: 317
- Joined: August 8th, 2011, 1:04 pm
- Location: Finland
- Contact:
Re: Hex plug in Fiat TC cylinder head
I'm used M16x1,5 tapered temp sender in TC head. Fits nicely, similar like in head which has 100% certain M16x1.5 taper threads.
But if I look both M16x1,5 and 3/8 BSPT threads, they are pretty close to each other.
But if I look both M16x1,5 and 3/8 BSPT threads, they are pretty close to each other.
GC_25
-
- Posts: 12
- Joined: June 21st, 2009, 6:03 am
Re: Hex plug in Fiat TC cylinder head
Yes it came out in pieces. Quite a chore. I had to drill it out and split the remainder with a small chisel. I does appear to be threaded as 3/8 NPT/BSP.
Daniel
Daniel
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Hex plug in Fiat TC cylinder head
I had some gauge adaptors made some years back - the guy who cnc machined them was very skilled and had a huge range of thread gauges to aid him. He went thru several before declaring he was going with 3/8 BSPT.
This is why I suggest - 3/8" BSPT is the one to use.
GC
This is why I suggest - 3/8" BSPT is the one to use.
GC
-
- Posts: 50
- Joined: July 9th, 2011, 2:30 pm
- Contact:
Re: Hex plug in Fiat TC cylinder head
I just looked the Fiat Strada manual to be safe, it shows as M16x1.5 thread(water transmitter torqued at 49Nm). It could be that newer models the thread has changed to metric?
Regards
Daniel
Regards
Daniel
GC_17
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Hex plug in Fiat TC cylinder head
ooops, never thought of looking that up so well done you and Tommi!
Seems I was wrong all along. If it's any consolation to anyone who bought an adapter from me - they don't leak or split the head..
G
Seems I was wrong all along. If it's any consolation to anyone who bought an adapter from me - they don't leak or split the head..
G
-
- Posts: 184
- Joined: December 2nd, 2012, 3:45 pm
- Location: Lodz,Poland
Re: Hex plug in Fiat TC cylinder head
I noticed according to photos from Your book and from this forum that You always remove a hex plug from TC head. Could You tell me a reason why You are doing it ? Removing it is a bit tricky, the only reason for removing it is in my opinion for a better coolant passages cleaning.
When You fit a new plug (stainless ?) which Loctite You are using, a 542 ? Do You remove also a hex plugs from a front of the head ?
When You fit a new plug (stainless ?) which Loctite You are using, a 542 ? Do You remove also a hex plugs from a front of the head ?
GC approved
-
- Posts: 184
- Joined: December 2nd, 2012, 3:45 pm
- Location: Lodz,Poland
-
- Site Admin
- Posts: 5039
- Joined: June 18th, 2006, 9:31 am
- Location: Bedford, UK
- Contact:
Re: Hex plug in Fiat TC cylinder head
I only remove the plug if I need TWO instrument sender locations!
G
G
Guy Croft, owner
Who is online
Users browsing this forum: No registered users and 5 guests