Looking for Sample screens for my 2,0 16V

[torkil]

Hi Trying to map My DTA , And i end up with wery high ignition degrees without knocking ,as far as i can hear! using a AFR meter and skilled experience to map in uphill.

Wonder anybody have some sample screens from mapping 2,0 16 V ECU. at least so i can compare a bit. Runs great now, but still worrid about high degrees off ignition . Full thottle on 6000rpm 32 degrees in advance. More on half throttle at 4000rpm.

Have throttle bodies and Two 280 degrees cams ,and 12/1 in compression,

Reg Ove Thorkildsen othorkild@c2i.net

[Abarthnorway - Remi L]

Hi Torkil!

You never give up do You??! ;-)
Wonderful!

Someone out there sitting on this info?

Hi Trying to map My DTA , And i end up with wery high ignition degrees without knocking ,as far as i can hear! using a AFR meter and skilled experience to map in uphill.

Wonder anybody have some sample screens from mapping 2,0 16 V ECU. at least so i can compare a bit. Runs great now, but still worrid about high degrees off ignition . Full thottle on 6000rpm 32 degrees in advance. More on half throttle at 4000rpm.

Have throttle bodies and Two 280 degrees cams ,and 12/1 in compression,

Reg Ove Thorkildsen othorkild@c2i.net

Remi Lovhoiden