My Fiat Tipo HF Integrale

Post pics of your car in here
ICI
Posts: 55
Joined: August 30th, 2006, 9:02 pm
Location: Rousse, Bulgaria
Contact:

Re: My Fiat Tipo HF Integrale

Post by ICI » October 8th, 2012, 11:29 pm

Urbancamo wrote:Hello.

Some serious power you get there, definately.

Keep up the good work.

T
Thanks :)
I did a little testing this night, big wheel spinning at 1st and too early 2nd shifting
http://www.youtube.com/watch?v=UvsHtj-w8HE

boost 1.4 bar, the times approx like that:

1/4 mile 11.5 sec @ 191 km/h

0-100 km/h 3.8 sec

0-200 km/h 13.5 sec

100-200 km/h 9.7 sec
powered by ICIDesign

tricky
Posts: 101
Joined: July 6th, 2010, 5:41 pm

Re: My Fiat Tipo HF Integrale

Post by tricky » October 9th, 2012, 8:14 am

That engine sounds truly sweet on track !
Twice as many valves

ICI
Posts: 55
Joined: August 30th, 2006, 9:02 pm
Location: Rousse, Bulgaria
Contact:

Re: My Fiat Tipo HF Integrale

Post by ICI » October 9th, 2012, 11:18 am

tricky wrote:That engine sounds truly sweet on track !
yes, I love it :)
The track onboard at the previous page is filmed with GoPro cam and the sound is very clear and true.

Meanwhile, I soursed turbine housing 0.73 A/R, soon the improvement will take a place.
powered by ICIDesign

ICI
Posts: 55
Joined: August 30th, 2006, 9:02 pm
Location: Rousse, Bulgaria
Contact:

Re: My Fiat Tipo HF Integrale

Post by ICI » October 24th, 2012, 9:25 pm

The new A/R .73 turbine housing is here, compared next to the old one A/R 1.06.
The difference is pretty big, may be near 1000 rpm earlier spool will be :)
Attachments
Picture 631.jpg
Picture 631.jpg (162 KiB) Viewed 3552 times
Picture 647.jpg
Picture 647.jpg (268.53 KiB) Viewed 3552 times
powered by ICIDesign

ICI
Posts: 55
Joined: August 30th, 2006, 9:02 pm
Location: Rousse, Bulgaria
Contact:

Re: My Fiat Tipo HF Integrale

Post by ICI » October 25th, 2012, 10:48 pm

almost done, have to finish the 76mm full lenght stainless steel exhaust soon
Attachments
IMGP6562.jpg
IMGP6562.jpg (237.59 KiB) Viewed 3521 times
IMGP6572.jpg
IMGP6572.jpg (255.21 KiB) Viewed 3521 times
IMGP6575.jpg
IMGP6575.jpg (157.26 KiB) Viewed 3521 times
powered by ICIDesign

ICI
Posts: 55
Joined: August 30th, 2006, 9:02 pm
Location: Rousse, Bulgaria
Contact:

Re: My Fiat Tipo HF Integrale

Post by ICI » October 29th, 2012, 9:06 pm

finaly, did it for my car also
Attachments
IMGP6590.jpg
IMGP6590.jpg (152.57 KiB) Viewed 3326 times
IMGP6595.jpg
IMGP6595.jpg (176.12 KiB) Viewed 3326 times
powered by ICIDesign

ICI
Posts: 55
Joined: August 30th, 2006, 9:02 pm
Location: Rousse, Bulgaria
Contact:

Re: My Fiat Tipo HF Integrale

Post by ICI » November 4th, 2012, 10:28 pm

Unfortunately this evening the gearbox gave up.
I had boost creep issues with the Turbosmart 38mm wastegate together with the new 0.73 A/R turbine housing.
The boost was uncontrollable above 5000 rpm and I lost it few times up to 1.8 bar.
And a strong rattle and scratching noise appeared, obviously from 2 nd gear, the 1 st gear started whining too...
A lot of work has to be done.
powered by ICIDesign

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests