Page 1 of 1

Fiat Tipo 2.0 16v

Posted: April 2nd, 2020, 12:50 pm
by Robbie13
I had all the images nicely inline in the post, but then I did not post - I saved the draft. And of course the images were lost... So, images and comments attahed.

ECU chip replacement from fcperformance.co.uk installed.

I have a lot of small things to get done, but since nothing is urgent and it took over 5 years to get the car back on the road, I am happy just to be able to drive for now.

My dream is to build a fast road GC spec engine, maybe one day, if time and finances permit. :-)

Re: Fiat Tipo 2.0 16v

Posted: April 4th, 2020, 9:30 pm
by Spider 1969
Nice build!
Regards,
Charles

Re: Fiat Tipo 2.0 16v

Posted: April 11th, 2020, 9:00 am
by Guy Croft
MODEL POST!

It's nice to see this project..

G

Re: Fiat Tipo 2.0 16v

Posted: April 23rd, 2020, 10:15 am
by Robbie13
Thank you guys !

In the meantime my mechanic finally managed to mount new rear silencers.

I have been searching for anything I could find - Abarth, Remus, Supersprint - and I found Abarth-Exhausts from The Netherlands, they had some on stock.
IMG_20200420_085924.jpg
IMG_20200420_085924.jpg (1.1 MiB) Viewed 19613 times
They are by Ansa Marmitte - Ansa Tech Exhausts.

The middle one is for my Tipo, but the rear one is for AR145, it took some fitting.
IMG_20190802_104140.jpg
IMG_20190802_104140.jpg (1.35 MiB) Viewed 19613 times
I love the improvement in the exhaust note, especially at low throttle and rpm, and not loud at all, the engine intake sound is still overwhelming when pushing it :-)

Btw, Guy, how come the forum is public now ? I remember paying for access. I've sent a message to Val, but he is not responding for now.