Page 1 of 1

My Fiat 124 Spider Vintage Racer

Posted: August 10th, 2009, 12:31 pm
by Andre124
Just something I picked up in June.

Former track day car that is being spec'd for vintage racing in Canada.

Currently adjusting the roll bar to meet the rule requirements. Needed to add new plates.
Long term will see a full cage.
Fuel cell will be ordered soon as well.

Image

Image

Image

Image

Re: My 1977 Fiat 124 Spider Vintage Racer

Posted: August 10th, 2009, 12:36 pm
by Andre124
17" 47 Series - Intermediate Road Race
http://www.kirkeyracing.com/index.php?l ... e=Series47

Image

Re: My 1977 Fiat 124 Spider Vintage Racer

Posted: January 10th, 2010, 11:01 pm
by Andre124
Its been an interesting few months for the Fiat.

A fellow Fiat racer showed up at my door step with a present.
Image

A little video with the new carb setup.
http://www.youtube.com/watch?v=aOcSCQb5JIo

Right now I'm in the middle of all sorts of race spec upgrades.

Majority of them are safety related.
Initially I had figured the AutoPower roll bar would be suitable to race with, but after trying to setup my seat the roll bar clearly was interfering with my seating position and also left me very exposed. My shoulder was outside of the main loop.

So I cut it out.
Image

In hindset it might have been better to find a more sorted out race car, but by doing the cage and seating stuff I am ensuring its setup for my needs.

The new cage will be setup with gussets for extra protection and the driver side will have nascar bars to provide me with some crush zone area between myself and the door.
Image

Few last shots from the Frozen Chosen. It was -25C. Have to roll the car out to do the bending.
Image
Image

Re: My Fiat 124 Spider Vintage Racer

Posted: March 20th, 2011, 7:57 pm
by outsider
Hi , When you have time can you tell me what material you made your dash from ? And if you would like to share any of methods ? Thanks Jim

Re: My Fiat 124 Spider Vintage Racer

Posted: July 7th, 2013, 3:41 am
by Andre124
A few modern updates for 2013.

Over the winter I rebuilt the bottom end after the #4 con rod bearing spun and got well eaten alive.

In June we returned to Mosport and had a really productive race weekend.

515
515
IMG_6576.jpg (195.28 KiB) Viewed 6200 times
Fresh power plant.
Fresh power plant.
IMG_6473.jpg (168.46 KiB) Viewed 6200 times
Exhaust.
Exhaust.
IMG_6600.jpg (134.73 KiB) Viewed 6200 times
Me and the race car.
Me and the race car.
Ashley_Mills05.jpg (151.79 KiB) Viewed 6200 times
Mosport 2013
Mosport 2013
Coburn-Andre_Rousseau.jpg (139.24 KiB) Viewed 6200 times