Fiat RITMO ABARTH 125TC

Post pics of your car in here
AbarthLubos
Posts: 33
Joined: May 25th, 2008, 6:09 pm
Location: CZ - Czech Republic, 47001 Česká Lípa
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by AbarthLubos »

AbarthLubos
Posts: 33
Joined: May 25th, 2008, 6:09 pm
Location: CZ - Czech Republic, 47001 Česká Lípa
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by AbarthLubos »

before finish of my project
Attachments
a olejáč.jpg
a olejáč.jpg (90.31 KiB) Viewed 11541 times
b cívky.jpg
b cívky.jpg (83.64 KiB) Viewed 11541 times
c pracovní prostor.jpg
c pracovní prostor.jpg (100.81 KiB) Viewed 11541 times
IC from Lancia Delta Integrale
IC from Lancia Delta Integrale
a.jpg (120.81 KiB) Viewed 11541 times
IC in Ritmo
IC in Ritmo
4.jpg (144.95 KiB) Viewed 11541 times
no coment.. :-)
no coment.. :-)
c.jpg (158.61 KiB) Viewed 11541 times
Ritmo Abarth125TC
AbarthLubos
Posts: 33
Joined: May 25th, 2008, 6:09 pm
Location: CZ - Czech Republic, 47001 Česká Lípa
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by AbarthLubos »

Ritmo Abarth125TC
AbarthLubos
Posts: 33
Joined: May 25th, 2008, 6:09 pm
Location: CZ - Czech Republic, 47001 Česká Lípa
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by AbarthLubos »

.
Last edited by AbarthLubos on July 26th, 2010, 6:55 pm, edited 1 time in total.
Ritmo Abarth125TC
AbarthLubos
Posts: 33
Joined: May 25th, 2008, 6:09 pm
Location: CZ - Czech Republic, 47001 Česká Lípa
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by AbarthLubos »

Hi Guy, hi all.... first time I had in my Fiat 190PS, because it was not OK for me, I made update with 280PS. I drove my first 400m and problem was with my clutch. Very, very much skimmed. It was not good.
http://www.youtube.com/watch?v=KERoN3ItYqU
http://www.youtube.com/watch?v=h2BvL2YP1EA
After it I dismantled my Fiat and started new update
Ritmo Abarth125TC
AbarthLubos
Posts: 33
Joined: May 25th, 2008, 6:09 pm
Location: CZ - Czech Republic, 47001 Česká Lípa
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by AbarthLubos »

my big dream 400PS and very much Nm
Attachments
For my Fiat I have special car
For my Fiat I have special car
pict_20100425_201218.jpg (22.81 KiB) Viewed 10877 times
new clutch  +40% press
new clutch +40% press
pict_20100526_211842.jpg (26.84 KiB) Viewed 10877 times
old and new
old and new
pict_20100526_211934.jpg (25.35 KiB) Viewed 10877 times
lining
lining
pict_20100526_212149.jpg (23.39 KiB) Viewed 10877 times
new parts for my engine
new parts for my engine
pict_20100617_220537.jpg (29.41 KiB) Viewed 10877 times
flywheel
flywheel
pict_20100620_202943.jpg (19.26 KiB) Viewed 10877 times
a
a
pict_20100617_221227.jpg (14.46 KiB) Viewed 10877 times
new big IC
new big IC
pict_20100709_220447.jpg (27.92 KiB) Viewed 10877 times
spritzer - injectors 850cc
spritzer - injectors 850cc
pict_20100527_160436.jpg (16.22 KiB) Viewed 10877 times
new doors only 4,4kg
new doors only 4,4kg
pict_20100515_175526.jpg (21.52 KiB) Viewed 10877 times
laminate new bonnet
laminate new bonnet
pict_20100606_130207.jpg (18.13 KiB) Viewed 10877 times
a
a
pict_20100606_130302.jpg (19.17 KiB) Viewed 10877 times
a
a
pict_20100606_130037.jpg (14.25 KiB) Viewed 10877 times
a
a
pict_20100606_130127.jpg (21.79 KiB) Viewed 10877 times
no coment :-)
no coment :-)
pict_20100717_195236.jpg (34.03 KiB) Viewed 10877 times
a
a
pict_20100724_123844.jpg (37.73 KiB) Viewed 10877 times
a
a
pict_20100724_123953.jpg (55.86 KiB) Viewed 10877 times
a
a
pict_20100724_124102.jpg (48.64 KiB) Viewed 10877 times
and...
and...
pict_20100710_154601.jpg (27.58 KiB) Viewed 10877 times
Ritmo Abarth125TC
mitch strada
Posts: 39
Joined: November 3rd, 2006, 6:02 pm
Location: London, UK
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by mitch strada »

WOW great project sir, fantastic work.
May I enquire where you located the lightweight doors and tailgate and if it is possible to get a set for my 130tc?

Please mail me direct if this request or the subsequent answer contravene the rules of the forum.

contactstrada@strada130.co.uk

Regards

Mitchell Pescay

strada 130tc owners club GB
AbarthLubos
Posts: 33
Joined: May 25th, 2008, 6:09 pm
Location: CZ - Czech Republic, 47001 Česká Lípa
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by AbarthLubos »

news
Attachments
a.jpg
a.jpg (109.84 KiB) Viewed 10816 times
b.jpg
b.jpg (120.77 KiB) Viewed 10816 times
Ritmo Abarth125TC
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by Guy Croft »

Great project and nicely presented!

The only remark I want to make is I do not like that header. Without wishing to 'spoil the party' I have done extensive flowtests on types same or exactly like that and the results are alarmingly bad. That is just part of the story however - I have written extensively about turbo header design in my new book (see GC Virtual Workshop) and you should read before proceeding.

G
AbarthLubos
Posts: 33
Joined: May 25th, 2008, 6:09 pm
Location: CZ - Czech Republic, 47001 Česká Lípa
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by AbarthLubos »

Hello Guy,

thanks a lot, could you just let me know if by the term Header you mean Intercooler or is it sth different, if header = intercooler, does it mean then that the outgoing tubes are both at the same side?

thanks,
Rgds,
Ritmo Abarth125TC
Honza
Posts: 85
Joined: June 22nd, 2006, 8:04 pm
Location: Lomnice nad Popelkou (60 north from Prague), Czech Republic
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by Honza »

Luboši hedaer = svody
#100
AbarthLubos
Posts: 33
Joined: May 25th, 2008, 6:09 pm
Location: CZ - Czech Republic, 47001 Česká Lípa
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by AbarthLubos »

Díky Honzo zajimavý to název pro svody.
Guy, I have info from Honza now.
Ritmo Abarth125TC
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by Guy Croft »

Some photos may illustrate, the flow results are only a small part of the problem one faces with turbo header design.

These tests on a standard head with 112cfm @10" bare port flow. The losses are due to turbulence caused by:

1. Bend radius
2. Pipe flare at port exit
3. Internal weld quality

I cannot over-emphasise that the design of a turbo header is extremely critical and with a bad design, port/cylinder overheating, detonation (not to mention loss of potential power) and fuel/ignition calibration difficulties are just a few of the possible consequences. The primary wave effects in particular can have an extreme effect on the firing cycles such that no two firing strokes are the same. You can imagine the problems that can cause with 'calibration'.

As I said, tons on this in my new book.


G
Attachments
header_01 port 1 giving 81cfm - best runner.jpg
header_01 port 1 giving 81cfm - best runner.jpg (453.09 KiB) Viewed 10708 times
header_01 port 2 giving only 66.8cfm - worst runner.jpg
header_01 port 2 giving only 66.8cfm - worst runner.jpg (443.01 KiB) Viewed 10708 times
UNASHAMED PLUG: COMING YOUR WAY SOON. IF YOU BUY ONE.
UNASHAMED PLUG: COMING YOUR WAY SOON. IF YOU BUY ONE.
BOOKS BOXED (450 x 600).jpg (172.92 KiB) Viewed 10707 times
AbarthLubos
Posts: 33
Joined: May 25th, 2008, 6:09 pm
Location: CZ - Czech Republic, 47001 Česká Lípa
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by AbarthLubos »

Ritmo Abarth125TC
AbarthLubos
Posts: 33
Joined: May 25th, 2008, 6:09 pm
Location: CZ - Czech Republic, 47001 Česká Lípa
Contact:

Re: Fiat RITMO ABARTH 125TC

Post by AbarthLubos »

Hi Guy, Hi all, last yer was not unacceptable for my Fiat, because I bougrt small house. I worked only few weeks but mthis yer will be for my Fiat good ...I think
Attachments
makrolon windows
makrolon windows
pict_20100807_211055.jpg (17.46 KiB) Viewed 9725 times
a
a
pict_20100807_211137.jpg (24.58 KiB) Viewed 9725 times
Ritmo Abarth125TC
Post Reply

Who is online

Users browsing this forum: No registered users and 45 guests