Triumph Herald twin Cam

Road-race engines and ancillaries - general discussion
Post Reply
mike5427
Posts: 8
Joined: May 29th, 2014, 9:09 pm
Contact:

Triumph Herald twin Cam

Post by mike5427 »

https://www.youtube.com/watch?time_cont ... wZLVHGGbqU
My Triumph Herald Fiat Twin Cam, I thought members might be interested in this video
GC_89
Spider 1969
Posts: 159
Joined: September 22nd, 2013, 7:21 pm
Contact:

Re: Triumph Herald twin Cam

Post by Spider 1969 »

Hi Mike,

Sounds and looks good. Could you share the specs and some pictures of the engine (bay)?

Regards,

Charles
GC_26
mike5427
Posts: 8
Joined: May 29th, 2014, 9:09 pm
Contact:

Re: Triumph Herald twin Cam

Post by mike5427 »

IMG_20180927_135450.jpg
IMG_20180927_135450.jpg (1.97 MiB) Viewed 18810 times
IMG_20180927_135350.jpg
IMG_20180927_135350.jpg (1.71 MiB) Viewed 18810 times
Its a 1600 cc engine with 2l cams, the carburettor is a 38mm weber down draught from a 3l v6 ford engine re jetted and works really well, the inlet manifold is modified to accept this.
The interesting thing is that I found that the MGF exhaust manifold was almost a perfect pattern match for the twin cam head so I bought two used manifolds and from all the bends made up the tube manifold, I bought a four into one collector off an internet auction site and the whole thing works a treat!!
WP_20151116_001.jpg
WP_20151116_001.jpg (2.36 MiB) Viewed 18810 times
WP_20151120_001.jpg
WP_20151120_001.jpg (2.51 MiB) Viewed 18810 times
GC_89
Spider 1969
Posts: 159
Joined: September 22nd, 2013, 7:21 pm
Contact:

Re: Triumph Herald twin Cam

Post by Spider 1969 »

Nice work!

Regards,
Charles
GC_26
Post Reply

Who is online

Users browsing this forum: No registered users and 36 guests