Need help identifying camshafts!

Road-race engines and ancillaries - general discussion
Post Reply
Hermanzini
Posts: 2
Joined: March 19th, 2013, 10:21 am

Need help identifying camshafts!

Post by Hermanzini »

Hi!

I had to scrap the original engine block on my Montecarlo so I replaced it with a standard Abarth 130TC block and head. I have used the Montecarlo cam boxes and oil sump because of the engine tilt.
There was an Alquati kit on this car with inlet manifold and 2x40mm Weber DCNF (36mm throat), The cams was marked 10,6(lift?) and 4 into 1 sports exhaust.
Do you think this will work ok together?

Close up picture of camshaft is in next post.

Thanks!

Roar
Attachments
roar148do4.jpg
roar148do4.jpg (70.27 KiB) Viewed 4014 times
roar225zy6.jpg
roar225zy6.jpg (69.58 KiB) Viewed 4014 times
roar223we4.jpg
roar223we4.jpg (66.43 KiB) Viewed 4014 times
82343760950776906562319.jpg
82343760950776906562319.jpg (53.22 KiB) Viewed 4014 times
85826860950772573229495.jpg
85826860950772573229495.jpg (79.91 KiB) Viewed 4014 times
Last edited by Hermanzini on March 22nd, 2013, 7:42 pm, edited 1 time in total.
Hermanzini
Posts: 2
Joined: March 19th, 2013, 10:21 am

Re: Lancia Montecarlo with 130TC engine swap.

Post by Hermanzini »

I will try to be more clear!
As I understand from reading up on this forum the Alquati cams have markings on the end, these haven't but both are marked with 10.6 N`2 on the camshaft. Is that enough to identify them?

I am going to use this car for trips as well as the occasional track-day, so I would like it to be nice and driveable with good torque.
If they are to aggressive I will have to replace them.
Thats why I would like some help with identification of the cams, please.

Thanks

Roar
Attachments
This is a picture of the inlet cam close to the camwheels. Both cams have the same markings 10.6 N`2.
This is a picture of the inlet cam close to the camwheels. Both cams have the same markings 10.6 N`2.
incam.jpg (202.19 KiB) Viewed 3957 times
Post Reply

Who is online

Users browsing this forum: No registered users and 39 guests