Page 1 of 1

2L twin cam overhaul

Posted: September 2nd, 2015, 5:53 pm
by Håvard
Hi. I have a little problem with my cam housing, it seems like my gasket for the cover in the rear of the camhouse is to thin, when i tigthen the cover the cam gets stuck. If the gaskets is the problem where can i buy the proper ones, first picture is the old gasket the second one is the new and the third is two new gaskets together, i am going to use a block mounted distributor, so i want a lid or cover for my cam house where the distributor was.

Re: 2L twin cam overhaul

Posted: September 2nd, 2015, 7:00 pm
by Spider 1969
Hi,

You're not the only one who encountered this:

http://guy-croft.com/viewtopic.php?f=4& ... zed#p21334

GCRE can supplement the right gaskets for sure.

Regards,

Charles

Re: 2L twin cam overhaul

Posted: September 3rd, 2015, 1:19 pm
by Håvard
Thanks for the answer to my problem, much appreciated.

Best regards Håvard Mittet