2L twin cam overhaul

Question and answer direct with GC. Competition engines and 'live' projects only. Good photos to illustrate your post are expected.
Post Reply
Håvard
Posts: 9
Joined: Tue Sep 24, 2013 10:57 pm
Contact:

2L twin cam overhaul

Post by Håvard » Wed Sep 02, 2015 5:53 pm

Hi. I have a little problem with my cam housing, it seems like my gasket for the cover in the rear of the camhouse is to thin, when i tigthen the cover the cam gets stuck. If the gaskets is the problem where can i buy the proper ones, first picture is the old gasket the second one is the new and the third is two new gaskets together, i am going to use a block mounted distributor, so i want a lid or cover for my cam house where the distributor was.
Attachments
image.jpg
image.jpg (552.49 KiB) Viewed 1220 times
image.jpg
image.jpg (597.56 KiB) Viewed 1220 times
image.jpg
image.jpg (547.35 KiB) Viewed 1220 times
image.jpg
image.jpg (581.19 KiB) Viewed 1220 times
image.jpg
image.jpg (529.83 KiB) Viewed 1220 times

Spider 1969
Posts: 122
Joined: Sun Sep 22, 2013 7:21 pm
Contact:

Re: 2L twin cam overhaul

Post by Spider 1969 » Wed Sep 02, 2015 7:00 pm

Hi,

You're not the only one who encountered this:

http://guy-croft.com/viewtopic.php?f=4& ... zed#p21334

GCRE can supplement the right gaskets for sure.

Regards,

Charles
GC_26

Håvard
Posts: 9
Joined: Tue Sep 24, 2013 10:57 pm
Contact:

Re: 2L twin cam overhaul

Post by Håvard » Thu Sep 03, 2015 1:19 pm

Thanks for the answer to my problem, much appreciated.

Best regards Håvard Mittet

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests