Camshaft for my 8v, 2 Liter

Competition engines and 'live' projects only. Good photos to illustrate your post are expected.
Post Reply
wfolland
Posts: 6
Joined: December 1st, 2013, 8:23 pm
Contact:

Camshaft for my 8v, 2 Liter

Post by wfolland »

Would camshaft , P/N 4334837, from a early Fiat, be a good fit for my 8v/2 Liter engine that I am having rebuilt. The engine will have a 10:1 compression ratio and twin weber IDF 40's. Have a chance to purchase this cam, bran new, although the purchase does not include the exhaust cam. Any suggestions will be greatly appreciated.
GC_65
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

Re: Camshaft for my 8v, 2 Liter

Post by Guy Croft »

Sorry - I just do not know what engine this part number relates to..

G
Guy Croft, owner
Gary.H
Posts: 2
Joined: April 11th, 2014, 1:43 pm
Contact:

Re: Camshaft for my 8v, 2 Liter

Post by Gary.H »

*General internet forum accuracy not withstanding...

Another Fiat forum has 4334837 as a Pittatore camshaft:

Seemingly from a Fiat 2L TC 131 racing. Higher lift cam @9.900mm lift, with 15/55 57/13 cam timing 245 degrees. Pittatore call these a B26.

Fiat 4334837 wide lobe intake (245 @ 0.80mm) 9.900mm lift
GC_81
wfolland
Posts: 6
Joined: December 1st, 2013, 8:23 pm
Contact:

Re: Camshaft for my 8v, 2 Liter

Post by wfolland »

Gary, thanks for that information. Would you have an opinion as to rather or not this would be a good inlet cam for me rebuild ?

Guy if you read this thread I would like your opinion also.

Again thank you Gary.
GC_65
Gary.H
Posts: 2
Joined: April 11th, 2014, 1:43 pm
Contact:

Re: Camshaft for my 8v, 2 Liter

Post by Gary.H »

Hi wfolland,

The info I posted was only what I found whilst trawling the net. As I said the usual caveats about trusting internet-sourced info apply ! (although it did come from a Fiat forum).

Just trying to help you narrow down where the cam might have come from.

Unfortunately I'm better at finding info on the net than I am advising on parts suitability so will defer to more knowledgeable members to provide help.
GC_81
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

Re: Camshaft for my 8v, 2 Liter

Post by Guy Croft »

I think those numbers are the blank (chill cast) rather than the part number..

G
Guy Croft, owner
wfolland
Posts: 6
Joined: December 1st, 2013, 8:23 pm
Contact:

Re: Camshaft for my 8v, 2 Liter

Post by wfolland »

Thanks Guy, will do some more research myself to determine exactly where and to what camshaft this this P/N can be associated to.
GC_65
Post Reply

Who is online

Users browsing this forum: No registered users and 39 guests