Alquati Cams ?

Competition engines and 'live' projects only. Good photos to illustrate your post are expected.
Post Reply
engineerted
Posts: 27
Joined: September 26th, 2007, 7:05 pm
Location: Farmington, MI, USA (A)
Contact:

Alquati Cams ?

Post by engineerted »

can anyone identify these cams?
Alquati A44/5/M
Thanks

Image
74FP SCCA 124 spider
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

Re: Alquati Cams ?

Post by Guy Croft »

I've got the list data on A-44/4M and A-44/6/M

but oddly - not 5M!

If you measure the nominal lift with a dti between centers I can probably figure out the rest. I think the M stands for Montecarlo so one probably has a drive gear for the inlet-side cambox mounted distr on that engine (not the same as Fiat 124..)

G
engineerted
Posts: 27
Joined: September 26th, 2007, 7:05 pm
Location: Farmington, MI, USA (A)
Contact:

Re: Alquati Cams ?

Post by engineerted »

Thanks Guy, the nominal lift is 10.9mm.

Ted
74FP SCCA 124 spider
Guy Croft
Site Admin
Posts: 5039
Joined: June 18th, 2006, 9:31 am
Location: Bedford, UK
Contact:

Re: Alquati Cams ?

Post by Guy Croft »

Alquati steel billet rally cam,from their old catalogue:

'Motori molto elaborati o rally'

28/68 68/28
0.3mm running clearances

G
FiatRally
Posts: 65
Joined: February 11th, 2013, 6:37 pm
Location: Cape Town. South Africa
Contact:

Re: Alquati Cams ?

Post by FiatRally »

Hallo gents,

I see this is an old thread. This is what I am playing and learning about at the moment!

I checked the specs as my Alquati Book of 1984 states these cams as:

Lancia Beta MonteCarlo C148 Lift is 10.9 as new, yes.

The cam timing given as per Alquati is:
Asp. 48 - 67 and Sca 65 - 46

The A-44/6/M has the same timing with 11.3mm lift and used the C201 profile.

The A-44/4/M has been given as 40 - 80 and 80 - 40 with a lift of 10.35mm

A variant known as A-44/4/87m also exsist and given as 42 - 82 and 82 - 42 with a lift of 10.6mm

I hope this helps.

Ernst
GC_75
Post Reply

Who is online

Users browsing this forum: No registered users and 29 guests